2 E1/T1 over Ethernet Multiplexer Huahuan (H0FL-ETHMUX V802) C-LINK Phân Phối

Overview.

       As a cost-effective solution for the traditional telecom services transition to IP packet networking technology, applied H0FL-EthMux V802 TDM over IP technology transfer, it transmits the data via the IP or E1 Ethernet available.

       H0FL-EthMux V802 TDM over IP equipment with new generation IP communications circuit supports E1 transmission via IP or Ethernet network. Uplink ports and user data complies with IEEE 802.3, Ethernet ports with auto-recognition speed 10/100.

       Advanced design provides the ability to meet high network availability with the accurate timing signal and reconstruct the data bit stream. Configure the system parameters predestined according to the requirements of different applications, simplifying installation and maintenance cost savings.

       Telecom operators, enterprises and users can save a lot of cost and access devices generate new revenue by offering different types of services transmitted over existing Ethernet networks. It is also suitable for connecting to the wireless device for the rapid deployment of E1 services. One particular application is to build E1 links with the wireless LAN bridge low cost alternative to many radio stations microwave higher price. Operators can use EthMux H0FL-V802 to deliver TDM services over packet-switched networks wired or wireless.

 Features.

1 Supports Web management user-friendly solution for easy installation and maintenance.

2 Support for SNMP network management

3 2 uplink port, 2-port E1 / T1

4 Restore clock E1 / T1 stable, low jitter delay

5 Late handle E1 / T1 low, efficiency high bandwidth

6 Anti packet loss, with PCM frame synchronization protection

7 Use the specified size packet encapsulation for various applications

8 Support Ethernet encapsulation and UDP encapsulation / IP

9 Support for VLAN services E1 / T1 and ice management VLAN

10 Dem jitter enough to resist change packet latency (PDV)

11 Instructions E1 packet loss and partial distal AIS LOS serve the troubleshooting and maintenance.

The post 2 E1/T1 over Ethernet Multiplexer – Model: H0FL-ETHMUX V802 appeared first on C-LINK.

4 E1/T1 Over Ethernet Multiplexer Huahuan (H0FL-Ethmux V804) C-LINK Phân Phối

 Features

     1.       User-friendly Web server supported for easy setup and maintenance

     2.       Support SNMP V1 and V2 network management

     3.       point to point and point to multipoint supported

     4.       Four E1 Ports supported

     5.       Uplink ports 1+1 backup supported

     6.       Stable E1 clock recovery, low jitter and wander

      7.       Low processing delay for E1 channels, high bandwidth usage efficiency

      8.      Resist to packet loss, with PCM frame synchronization protection

      9.      User definable encapsulation packet size for different application

      10.    Support Ethernet encapsulation and UDP/IP protocol encapsulation.

      11.    Support VLAN settings for E1 service and in band VLAN management.

      12.    Enough jitter buffer to resist packet delay variation (PDV)

      13.    Local Ethernet port throughput limiting, assuring E1 QoS

      14.    Local and remote E1 LOS and A IS and packet loss indication for trouble-shooting and maintenance

      15     Support cascade concatenate for more than 4 E1 ports

 Application

The post 4 E1/T1 Over Ethernet Multiplexer – Model: H0FL-Ethmux V804 appeared first on C-LINK.

8 E1/T1 Over Ethernet Multiplexer Huahuan (H0FL-EthMux V8) C-LINK Phân Phối

Features
1.   User-friendly Web server supported for easy setup and maintenance 
2.   Support SNMP V1 and V2 network management 
3.   Provide alarm log 
4.   Point to point and point to multipoint supported 
5.   8 E1 Ports supported 
6.   Uplink ports 1+1 backup supported 
7.   Stable E1 clock recovery, low jitter and wander 
8.   Low processing delay for E1 channels, high bandwidth usage efficiency 
9.   Resist to packet loss, with PCM frame synchronization protection 
10.  User definable encapsulation packet size for different application 
11.  Support Ethernet encapsulation and UDP/IP protocol encapsulation. 
12.  Support VLAN settings for E1 service and in band VLAN management. 
13.  Enough jitter buffer to resist packet delay variation (PDV) 
14.  Local Ethernet port throughput limiting, assuring E1 QoS 
15.  Local and remote E1 LOS and AIS and packet loss indication for trouble-shooting and maintenance 
16.  Support cascade concatenate for more than 8 E1 ports 

Typical Applications

The post 8 E1/T1 Over Ethernet Multiplexer – Model: H0FL-EthMux V8 appeared first on C-LINK.

16 E1/T1 Over Ethernet Multiplexer (PoE) Huanhuan (H0FL-EthMux P16) C-LINK Phân Phối

Features
1.   Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports. 
2.   2 uplink electrical Ethernet ports can provide power(55V, DC) for remote devices (Power Over Ethernet) 
3.   Support Ethernet uplink port 1+1 protection 
4.   User-friendly Web server supported for easy setup and maintenance, alarm log provided 
5.   Support SNMP V1/V2 network management 
6.   Ethernet built-in layer 2 switch, support VLAN, comply with IEEE 802.3x, 802.1P 
7.   Provide two pluggable E1 cards, each card supports 8 E1/T1s 
8.   Point to point and point to multipoint supported 
9.   Stable E1/T1 clock recovery, low jitter and wander 
10.   Low processing delay for E1 channels, high bandwidth usage efficiency 
11.   Resist to packet loss, with PCM frame synchronization protection 
12.   User definable encapsulation packet size for different application 
13.   Support Ethernet encapsulation and UDP/IP protocol encapsulation. 
14.   Support VLAN settings for E1 service and in band VLAN management. 
15.   Enough jitter buffer to resist packet delay variation (PDV) 
16.   Local Ethernet port throughput limiting, assuring E1 QoS 
17.   120Ω balanced E1/T1 port, RJ-45 connector, support 75Ω unbalanced port through outside converting cable. 
18.   Support cascade concatenate for more than 16 E1 ports 
19.   Software and hardware online upgrade 
20.   Power supply redundancy 
21.   POE power supply supported by power module with 220V AC input and 55V DC output. 

Typical Applications

The post 16 E1/T1 Over Ethernet Multiplexer PoE – Model: H0FL-EthMux P16 appeared first on C-LINK.

16 E1/T1 Over Ethernet Multiplexer Huahuan (H0FL-EthMux V16) C-LINK Phân Phối

Application
1 Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as the route to the network or user ports, Anyone of 5 GE electrical ports may act as NM port
2 Ethernet uplink ports support 1 +1 protection
3 user-friendly Web server supported for easy setup and easy maintenance, alarm log
4 Support for SNMP network management v1 / v2
5 Ethernet built-in layer 2 switch, support VLAN, comply with IEEE 802.3x, 802.1P
6 Provide two pluggable E1 cards, each card supports 8 E1 / T1s
7 Point to point and point to multipoint supported
8 stable clock recovery E1 / T1, low jitter and wander
9 Dealing with low delay for E1 channels, efficient use of high bandwidth
10 Anti packet loss, protected with PCM frame synchronization
Packed 11 packets user can specify the size for different applications
12 Support Ethernet encapsulation and UDP encapsulation / IP.
13 Support VLAN settings for E1 service and in band VLAN management.
14 Enough jitter buffer to resist packet delay variation (PDV)
Through
15 Ethernet local restrictions, E1 QoS guarantee
16 120Ω balanced E1 / T1, RJ-45 connectors, supports 75Ω unbalanced cable port external switch.
17 Support for more than 16 operators E1 connection
18 Software and hardware upgrades online
19 Power supply redundancy
20 POE power supply supported by power module with 220V AC input and DC output 55V.

Ứng dụng

The post 16 E1/T1 Over Ethernet Multiplexer – Model: H0FL-EthMux V16 appeared first on C-LINK.