.Overview
H9MO-LMXE is a carrier-class, cost-effective, compact (only 3U high), STM-1/STM-4/STM-16 SDH/MSTP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
H9MO-LMXE is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 3U high 19” wide chassis of the H9MO-LMXE has 19 slots, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for network interface unit(NIU) cards, and 14 slots for local interface unit(LIU) cards.
Feature
1. Support up to STM-1/STM-4/STM-16
2. SDH/PDH/PCM all integrated
3. Large cross-connect matrix capacity is 96*96 high order VC-4 cross connection or 2016*2016 VC-12 or 96*96 VC-3 level full cross connection
4. Support 1+1 MSP, SNCP protection
5. Management channel can be DCC/E1/VC12
6. Clocking mode supports: internal clock / external clock / line clock / clock holdover
7. Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN and 801.1Q VLAN
8. E1 BER tester is embedded
9. Support up to 110 Ethernet over 8*E1 (EoPDH or EoE) remote CPEs
10. Support up to 756 Ethernet over 1*E1 (EoPDH or EoE) remote CPEs
11. Support up to 110 Ethernet over VC-12 (EoSDH or EoS) remote CPEs
12. Online upgrading
13. Full redundancy design
Technical Specification
|
Index |
Performance Parameter |
||
|
SDH Interface |
Max |
OX01 |
32 STM-1 optical interfaces |
|
OX04 |
4 STM-4 optical interfaces, SFP |
||
|
OX16 |
4 aggregation STM-16 interface, SFP |
||
|
Connector |
SC/PC or FC/PC |
||
|
Spec. |
S-1.1, L-1.1, L-1.2, S4.1, L4.1 |
||
|
Single fiber bi-directional interface can be optionally supported |
|||
|
Service Card |
PWR01 |
Power Card -48VDC (Dual power for backup) |
|
|
NM01 |
EMS Management Card |
||
|
OX01 |
Dual STM-1 aggregation optical card |
||
|
OS01 |
Dual STM-1 tributary optical card |
||
|
EP01 |
24×E1 (75W or 120W) |
||
|
EP03 |
12×E1 (75W or 120W) |
||
|
EP02 |
1×E3/DS3 Card |
||
|
EP04 |
3×E3/DS3 Card |
||
|
FE01 |
4 FE over 4 VCG trunks (EoS) |
||
|
FE02 |
4 Fx over 4 VCG trunks (EoS) |
||
|
FE04 |
4 FE over 1~16E1 (EoE) |
||
|
FE05 |
4 Fx over 1~16E1 (EoE) |
||
|
ED01 |
2×V.35 Card（framed or unframed） |
||
|
DX02 |
Full 64E1 DS0 cross connection (2048×2048,64K) |
||
|
GX01 |
GE optical and electrical aggregation card, 24:1 |
||
|
FE06 |
Ethernet aggregation and layer 2 switch card, 8:1 |
||
|
LA01 |
Order wire card |
||
|
OS01 |
Dual STM-1 tributary optical card |
||
|
PDH interface |
E1 Spec. |
Comply with G.703, 2.048Mbps, HDB3 |
|
|
Max E1 |
168E1 (14 EP03 cards support) |
||
|
Ethernet |
Interface |
10/100Base-Tx or 100Base-Tx, Comply with IEEE 802.3 |
|
|
Max FE Interface |
56 FE ports (14 FE01 or FE02 cards support) |
||
|
Encapsulation |
Comply with ITU-T G.7041 (VCAT, GFP, LCAS) |
||
|
V.35 |
Max Interface |
28 V.35 interfaces (framed or unframed) DCE/DTE |
|
|
Cross-connect Capacity |
Uplink STM-1 |
High order 20×20 VC4sLow order 1260×1260 VC12s |
|
|
Uplink STM-4 |
High order 32×32 VC4sLow order 2016×2016 VC12s |
||
|
Management |
Interface |
10/100 Base-T (can be cascaded) |
|
|
EOW interface |
Standard socket RJ11 |
||
|
Physical Dimension(H/D/W) |
3U: 136 × 240 ×440 (mm) |
||
|
Power |
Supply |
-48V DC or dual power supply |
|
|
Consumption |
≤100W |
||
|
Environment |
Temperature |
0°C~50°C |
|
|
Humidity |
≤90 %(non-condensing) |
||
|
Weight |
≤8 k |
||
Download Datasheet H9MO-LMXE+
Hướng dẫn sử dụng : H9MO-LMXE+
Cách đặt hàng tại C-Link:
1. Hotline: 0904.999.815
2. Email: info@c-link.vn
3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội
4. Đăng ký online theo form sau:
Kinh doanh Thiết bị Kinh doanh Phụ kiện
Kinh doanh Dự án Hỗ trợ Kỹ thuật
CÔNG TY CỔ PHẦN CÔNG NGHỆ MẠNG VIỄN THÔNG C-LINK
