
Overview:
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, H0FL-EthMux SA1604 1608 16 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 4/8/16 E1 over FE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100 auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
H0FL-EthMux SA1604/1608/16 has 2 power slots, 1 E1 slot,1 FE uplink slot.
Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use H0FL-EthMux SA1604/1608/16 to provide legacy TDM services over wired or wireless packet network
Features
1. Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
2. Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 user data ports or monitoring ports, optical port can be used for uplink or user data.
3. User-friendly Web server supported for easy setup and maintenance
4. Support SNMP V1/V2 network management
5. E1 clock supports 3 mode: local clock, adaptive and loopback
6. E1 service support lossy and lossless protection
7. Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ
based), QoS(port based、8021.1P based、MAC based and TOS based).
8. Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet ring protection, OAM
and MAC address automatic learning
9. Ethernet packet size up to 9720byte
10. Point to point and point to multipoint supported
11. Local Ethernet port throughput limiting
12. Software and hardware online upgrade
13. Power supply redundancy
Technical Specifications
|
Item |
Description |
|
|
Model |
H0FL-EthMux SA1604 1608 16 |
2 PWR slots 1 E1 interface slot 1 Ethernet uplink slot |
|
Service card |
Ethernet uplink card |
4 FE electrical ports and 1 FE optical port Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x Speed and duplex auto-negotiation or manual |
|
E1 card |
H0FL-Ethmux SA1604: 4 E1 ports H0FL-Ethmux SA1608: 8 E1 ports H0FL-Ethmux SA16: 16 E1 ports |
|
|
Power |
Supply |
2 power slots |
|
AC 220v power module |
||
|
DC -48v power module |
||
|
Consumption |
≤40W |
|
|
Working Environment |
Temperature |
0~ 50°C |
|
Relative Humidity |
≤90% (non-condensing) |
|
|
Dimension |
W x H x D (mm): |
1U: 440 x 44 x 135 (mm) |
Download Datasheet : H0FL-EthMux SA1608 , H0FL-EthMux SA1604 ,
Hướng dẫn sử dụng : H0FL-EthMux SA1608,
Cách đặt hàng tại C-Link:
1. Hotline: 0904.999.815
2. Email: info@c-link.vn
3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội
4. Đăng ký online theo form sau:
Là một giải pháp hiệu quả về giá thành cho các dịch vụ viễn thông truyền thống chuyển đổi sang công nghệ mạng gói IP, H0FL-EthMux SA1604-1608-16 áp dụng công nghệ chuyển TDM qua IP, với mạch truyền thông IP hỗ trợ truyền tải 4/8/16 E1s qua cổng Ethernet. Cổng uplink và công dữ liệu người dùng tuân theo chuẩn IEEE 802.3, các cổng Ethernet có chức năng tự động nhận tốc độ 10/100.
Thiết kế tiên tiến cung cấp khả năng sẵn sàng đáp ứng mạng cao nhất với các tín hiệu thời gian chính xác và tái cấu trúc lại luồng bit dữ liệu. Cấu hình các tham số hệ thống tiền định theo các yêu cầu ứng dụng khác nhau, đơn giản hóa quá trình cài đặt và tiết kiệm chi phí bảo trì.

H0FL-EthMux SA1604-1608 có 2 khe nguồn, 1 khe E1 và 1 khe uplink FE.
Hãng viễn thông, doanh nghiệp và người dùng có thể tiết kiệm rất nhiều giá thành thiết bị và truy nhập tạo ra lợi nhuận mới bằng việc đưa ra các loại dịch vụ khác nhau trên cơ sở hạ tầng chuyển mạch gói của họ. Nó cũng phù hợp cho việc kết nối tới các thiết bị không dây để triển khai nhanh các dịch vụ E1.
Một ứng dụng đặc biệt là xây dựng các liên kết E1 với các cầu nối LAN không dây chi phí thấp, thay thế cho nhiều trạm vô tuyến vi ba giá thành cao hơn. Các nhà khai thác có thể sử dụng H0FL-EthMux SA1604 1608 16 để cung cấp các dịch vụ TDM qua mạng Ethernet/IP có dây hoặc không dây.
Tính năng.
1. Hỗ trợ giao thức IETF RFC4553 SAToP, hỗ trợ đóng gói Ethernet IP/UDP, L2TPv3 và MPLS
2. Cung cấp 4 cổng FE điện, 1 FE quang, 2 cổng uplink, 2 cổng dữ liệu người dùng hoặc cổng giám sát, cổng quang có thể sử dụng như cổng uplink hoặc cổng dữ liệu người dùng
3. Hỗ trợ quản lý Web thân thiện với người dùng giúp dễ dàng cài đặt và bảo trì
4. Hỗ trợ quản lý mạng SNMP v1/v2
5. Đồng hồ E1 hỗ trợ 3 chế độ: local clock, adaptive and loopback
6. Ethernet được gắn trong chuyển mạch lớp 2, hỗ trợ VLAN (theo 802.1Q và QinQ), QoS (theo 802.1P và dựa vào MAC, TOS)
7. Ethernet hỗ trợ IEEE 802.3x, Trunk, LACP, RSTP 802.1w, LLDP, CDP bảo vệ vòng ring Ethernet, tự học địa chỉ MAC và OAM
8. Kích thước gói Ethernet lên tới 9720byte
9. Hỗ trợ điểm – điểm và điểm – đa điểm.
10. Giới hạn băng thông cổng Ethernet
11. Nâng cấp trực tuyến phần mềm và phần cứng
12. Hỗ trợ nguồn dự phòng.
| Item | Description | |
| Model | H0FL-EthMux SA1604 1608 16 | 2 PWR slots1 E1 interface slot1 Ethernet uplink slot |
| Service card | Ethernet uplink card | 4 FE electrical ports and 1 FE optical port Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3xSpeed and duplex auto-negotiation or manual |
| E1 card | H0FL-Ethmux SA1604: 4 E1 portsH0FL-Ethmux SA1608: 8 E1 portsH0FL-Ethmux SA16: 16 E1 ports | |
| Power | Supply | 2 power slots |
| AC 220v power module | ||
| DC -48v power module | ||
| Consumption | ≤40W | |
| Working Environment | Temperature | 0~ 50°C |
| Relative Humidity | ≤90% (non-condensing) | |
| Dimension | W x H x D (mm): | 1U: 440 x 44 x 135 (mm) |
Download Datasheet : H0FL-EthMux SA1608 , H0FL-EthMux SA1604 ,
Hướng dẫn sử dụng : H0FL-EthMux SA1608,
Cách đặt hàng tại C-Link:
1. Hotline: 0904.999.815
2. Email: info@c-link.vn
3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội
4. Đăng ký online theo form sau: