Bộ Thu Phát 2 Kênh Video Sang Quang ZHT (VDO-2010 Serial) C-LINK Phân Phối
System Design
VDO-2010FDT/R provides for the digital transmission of 2 Channels Composite Video, 1 Duplex data, and data support RS485,RS232,RS422. no audio.
Stand-alone or rack-mount. All units of VDO-2010FDT/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VDO-CH04).
Single-Mode or Multi-Mode, VDO-2010FDT/R can support FC or ST optical connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer’s standard is: Single-mode 20km.
Features
• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer’s specifications,providing OEM
Specifications
| • Video | |
| Number of Channels: | 2 Channels Video |
| Video input/output impedance: | BNC 75 Ω |
| Video input/output Compatibility: | PAL, NTSC,SECAM |
| Video input/output voltage: | 1.0 Volt p-p |
| Bandwidth: | 6.5MHZ |
| Bit Resolution: | 8-Bit Digital Transmission |
| Differential Gain: | < 1.5% |
| Differential Phase: | < 1.5 ° |
| Tilt: | < 5% |
| Signal-to-Noise Ratio(SNR): | > 67 dB |
| • Data | |
| Data Formats: | RS485(2-wire or 4-wire),RS232,RS422,Contact Closure |
| Data Rate: | DC to 115.2Kbps |
| Bit Error Rate: | 10E-9 |
| • Connectors | |
| Video: | 75 Ohm BNC (Gold Center Pin) |
| Data: | Terminal Block |
| Optical: | FC (standard), ST Optional |
| Stand-Alone Power: | Screw terminal block |
| Rack Power: | AC line cord |
| • Electrical & Mechanical | |
| Input Power Requirements: | DC 5V@2A |
| Power Adapter: | AC 100V~240V |
| Power Consumption: | < 3W |
| Stand-Alone Dimensions: | 142mm × 107mm × 25mm |
| Card for 4U Rack Dimensions: | 145mm × 170mm × 20mm |
| Shipping Weight: | 1.8kg (include Transmitter & Receiver) |
| • Environmental | |
| Operating Temperature: | -40°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Ordering Information & Optical Specifications
| Model Number | Fiber Mode | Wavelengths | Optical Power Budget | Maximum Transmission Distance | |
| Transmitter | Receiver | ||||
| VDO-2010FDMT | VDO-2010FDMR | Multi-Mode | 1310/1550nm | 16dB | 2km |
| VDO-2010FDST | VDO-2010FDSR | Single-Mode | 1310/1550nm | 12dB | 20km |
| VDO-2010FDST-4 | VDO-2010FDSR-4 | Single-Mode | 1310/1550nm | 18dB | 40km |
| VDO-2010FDST-6 | VDO-2010FDSR-6 | Single-Mode | 1310/1550nm | 25dB | 60km |
| VDO-2010FDST-8 | VDO-2010FDSR-8 | Single-Mode | 1490/1550nm | 28dB | 80km |
Note:
• The Optical Power Budget data fit Multi-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables. power adapter included (for standalone) US, European, UK or Australian power plug.• Please feel free to consult factory for any special requirement and customization.
Cách đặt hàng tại C-Link:
1. Hotline: 0904.999.815
2. Email: info@c-link.vn
3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội
4. Đăng ký online theo form sau:
Kinh doanh Thiết bị Kinh doanh Phụ kiện
Kinh doanh Dự án Hỗ trợ Kỹ thuật
2-CH Video + 1 Duplex Data (VDO-2010 Serial) C-LINK Phân Phối
System Design
VDO-2010FDT/R provides for the digital transmission of 2 Channels Composite Video, 1 Duplex data, and data support RS485,RS232,RS422. no audio.
Stand-alone or rack-mount. All units of VDO-2010FDT/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VDO-CH04).
Single-Mode or Multi-Mode, VDO-2010FDT/R can support FC or ST optical connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer’s standard is: Single-mode 20km.
Features
• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer’s specifications,providing OEM
Specifications
| • Video | |
| Number of Channels: | 2 Channels Video |
| Video input/output impedance: | BNC 75 Ω |
| Video input/output Compatibility: | PAL, NTSC,SECAM |
| Video input/output voltage: | 1.0 Volt p-p |
| Bandwidth: | 6.5MHZ |
| Bit Resolution: | 8-Bit Digital Transmission |
| Differential Gain: | < 1.5% |
| Differential Phase: | < 1.5 ° |
| Tilt: | < 5% |
| Signal-to-Noise Ratio(SNR): | > 67 dB |
| • Data | |
| Data Formats: | RS485(2-wire or 4-wire),RS232,RS422,Contact Closure |
| Data Rate: | DC to 115.2Kbps |
| Bit Error Rate: | 10E-9 |
| • Connectors | |
| Video: | 75 Ohm BNC (Gold Center Pin) |
| Data: | Terminal Block |
| Optical: | FC (standard), ST Optional |
| Stand-Alone Power: | Screw terminal block |
| Rack Power: | AC line cord |
| • Electrical & Mechanical | |
| Input Power Requirements: | DC 5V@2A |
| Power Adapter: | AC 100V~240V |
| Power Consumption: | < 3W |
| Stand-Alone Dimensions: | 142mm × 107mm × 25mm |
| Card for 4U Rack Dimensions: | 145mm × 170mm × 20mm |
| Shipping Weight: | 1.8kg (include Transmitter & Receiver) |
| • Environmental | |
| Operating Temperature: | -40°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Ordering Information & Optical Specifications
| Model Number | Fiber Mode | Wavelengths | Optical Power Budget | Maximum Transmission Distance | |
| Transmitter | Receiver | ||||
| VDO-2010FDMT | VDO-2010FDMR | Multi-Mode | 1310/1550nm | 16dB | 2km |
| VDO-2010FDST | VDO-2010FDSR | Single-Mode | 1310/1550nm | 12dB | 20km |
| VDO-2010FDST-4 | VDO-2010FDSR-4 | Single-Mode | 1310/1550nm | 18dB | 40km |
| VDO-2010FDST-6 | VDO-2010FDSR-6 | Single-Mode | 1310/1550nm | 25dB | 60km |
| VDO-2010FDST-8 | VDO-2010FDSR-8 | Single-Mode | 1490/1550nm | 28dB | 80km |
Note:
• The Optical Power Budget data fit Multi-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables. power adapter included (for standalone) US, European, UK or Australian power plug.• Please feel free to consult factory for any special requirement and customization.
Cách đặt hàng tại C-Link:
1. Hotline: 0904.999.815
2. Email: info@c-link.vn
3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội
4. Đăng ký online theo form sau:
CÔNG TY CỔ PHẦN CÔNG NGHỆ MẠNG VIỄN THÔNG C-LINK
