Figure-8 Cable With Steel Tape (GYTC8S)

The fibers, either of single-mode or multimode type, are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After PSP is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene( PE) sheath to be figure8 structure. This kind of cable is specifically applied for self-supporting aerial installation.

 

1.    Accurate fiber excess length ensures a good performance of tensile strength and temperature.

2.    High strength loose tube that is hydrolysis resistant and special tube filling compound ensure a critical protection of fiber.

3.    The following measures are taken to ensure the cable watertight: Single steel wire as the central strength member Loose tube filling compound 100% cable core filling PSP enhancing moisture-proof

Appications

1.    Cách thức lắp đặt: trên không

2.    Thích hợp cho đường dài – xa và giao tiếp mạng LAN

3.    Kiểu sợi quang: Single-mode/Multi-mode 

Specifications

1.    Nhiệt độ lưu trữ: -40C to + 70C

2.    Nhiệt độ hoạt động: -40C to + 70C

3.    Bán kính uốn:    Tĩnh 10 x D

Figure-8 cable with steel tape (GYTC8S)

 Note:

1.    Suffix Xn denotes fiber type and see details in YOFC’ s cable coding illustration.

2.    The colour arrangement of fiber and tube is specified in the colour identification table.

3.    The nominal PE sheath thickness is l.8mm.

4.    The installation span should not be more than l20m and the installation sag should not be less than 0.5%.

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau: