Media converter 10/100M DYS1100 Serial

Giới thiệu

DYS1100 Series Fiber Media Converters can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It can extend traditional 10/100M fast Ethernet to the distance of 120km through optical fiber link. It possesses stable performance and good quality by adopting latest IC packages from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe network operation. DYS series external power supply Converters could be used alone, or inserted to 14 slots Converters Rack supplied by DYS Crop. Suitable for the use of Network Centre.

Features

1. Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex auto-sensed.

2. UTP port supports MDI/MDI-X auto crossover.

3. Indicator function of link fault (LFP): When optical fiber or UTP is at fault, the converter could stop all the link.

4. Multiple Optical Transceiver could be chosen: SC, ST or FC, single-mode / multi-mode

5. Supporting 1600 bytes packet for management

6. Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.

7. Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.

8. Internal or External switching power: for users to choose.

Technical Specifications

1. Operating standards：IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree STP

2. MAC addresses table: 1K

3.Data buffer: Built-in 128Kbyte RAM

4. Connectors: UTP Connector: RJ-45, 10/100Base-T,

5. Fiber Connector: ST/SC/FC, 100Base-FX

6. Cable:

    UTP: Cat. 5 (the max distance up to 100m)

    Dual-fiber Multi-mode: 5m (Fiber size: 62.5/125μm)/2Km (fiber size: 50/125μm)

    Dual-fiber Single-mode: 25/40/60/80/100/120Km; Single-fiber Single-mode: 25/40/60/80Km.

7. Flow Control

    Full Duplex: Supporting standard IEEE802.3x

    Half Duplex: back pressure

8. LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.

9. Power Requirement: AC 170 ~ 240V, DC 5V.

10. Ambient Temperature: 0 ~60°C

11. Humidity: 5 ~ 90%

12. Dimensions: – Internal power: 30×110×140mm ( 48VDC or 110~220VAC )

 - External power: 26×70×93mm ( 5VDC )

Download Datasheet DYS1100-Serial

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau: