Trang chủ»PRODUCTS»Pen - Type Visual Fault Locator»Pens optical detector VFL-FL

Pens optical detector VFL-FL

Bút Soi Quang ZHT (VFL-FL) C-LINK Phân Phối

Pen Optical Detector (VFL-FL) C-LINK 

This Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-toend visual fiber identification.

 Applications

Maintenance in telecom, CATV

Test Lab of optical fibers

Fiber routing and continuity checking in optical networks

Other fiber optic measurements

 Features

1. 1.25mm and 2.5mm universal connector, adaptor also can be provided on request

2. Operates either in CW or Pulsed mode with constant output power

3. Low battery warning

4. Long battery life (up to 60 hours)

5. Drop-resistant and dust-proof design of laser head

6. Laser case ground design prevents ESD damage

7. Portable and rugged

8. Easy to use

 Product Description

The Visual Fault Locator launches 650nm visible laser light into the fiber. When the light encounters a break or sharp bend, it scatters, and the scattered light can be observed emerging from the cable. The Visual Fault Locator can locates breaks in host patch cords, which an OTDR cannot detect due to their operating dead zone.

A fault locator is also much cheaper than an OTDR.

However, they are not recommended for using with dark-colored or armored cables.

The Pen-type Visual Fault Locator can be operated in either continuous wave mode (CW mode) or in pulsed mode. Pulsed mode aids in locating faults under high ambient light conditions and improve battery life. It also could be used in checking connector quality. Often a connector may appears to be perfect. But inside the connector ferrule itself, poor gluing or dirty may create a micro bend in the fiber. This micro bend will produce excess insertion losses or return losses, and may result in premature failure of the connector. As the visual light launches through the fiber, it emerges from the connector in question, one can readily see the distortion as a series of rings superimposed on a normal output. Bending or twisting the fiber may affect the overall intensity pattern, but not the ring pattern itself.

 

Specifications

Model VFL-FL
Central wavelength 650nm±10nm (635nm is available on request)
Emitter type FP-LD
Output power 5mw 10mw 20mw 30mw
Laser Range ≥5km ≥10km ≥20km ≥30km
Optical connector 1.25mm and 2.5mm universal connector, adaptor also can be provided on request
Operating model Both CW and Pulse available
Pulse frequency 2Hz to 3Hz
Power supply 2AA alkaline batteries
Battery LR6 AA alkaline battery
Operating temperature -20°C to 60°C
Storage temperature -40°C to 85°C
Dimension 23 x 183mm
Weight 110g (without battery)

Download Datasheet: VFL-FL

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau:


Họ và tên (*)

Email (*)

Số điện thoại (*)

Chủng loại

Nội dung yêu cầu

*Nhập mã bảo mật
captcha

Translate »