Bộ Thu Phát 4 video quang + 1 Duplex Data – Model: VDO-4010FDT/R

System Design

VDO-4010FDT/R provides for the digital transmission of 4 Channels Composite Video, 1 Duplex data, and data support RS485, RS232, RS422, no audio.
Stand-alone or rack-mount. All Fiber Optic Video Modem of VDO-4010FDT/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VDO-CH04).
Single-Mode or Multi-Mode,VDO-4010FDT/R can support FC or ST Optical connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer’s standard is: Single-mode 20km.

Features

• Support Point-to-Point or Daisy-Chain connection 
• Uncompressed Digital Composite Video over one fiber 
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 1.5 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters 
• No EMI or RFI and no ground loops 
• Support Coarse Wavelength Division Multiplexing (CWDM) 
• Stand alone or rack-mount 
• Produce according to customer’s specifications,providing OEM

Specifications

• Video
Number of Channels:	4 Channels Video
Video input/output impedance:	BNC 75 Ω
Video input/output Compatibility:	PAL, NTSC,SECAM
Video input/output voltage:	1.0 Volt p-p
Bandwidth:	6.5MHZ
Bit Resolution:	8-Bit Digital Transmission
Differential Gain:	< 1.5%
Differential Phase:	< 1.5 °
Tilt:	< 5%
Signal-to-Noise Ratio(SNR):	> 67 dB
• Data
Data Formats:	RS485(2-wire or 4-wire),RS232,RS422,Contact Closure
Data Rate:	DC to 115.2Kbps
Bit Error Rate:	10E-9
• Connectors
Video:	75 Ohm BNC (Gold Center Pin)
Data:	Terminal Block
Optical:	FC (standard), ST Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@3A
Power Adapter:	AC 100V~240V
Power Consumption:	< 5W
Stand-Alone Dimensions:	176.5mm × 158mm × 36mm
Card for 4U Rack Dimensions:	145mm × 170mm × 20mm
Shipping Weight:	2.2kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications 

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver
VDO-4010FDMT	VDO-4010FDMR	Multi-Mode	1310/1550nm	16dB	2km
VDO-4010FDST	VDO-4010FDSR	Single-Mode	1310/1550nm	12dB	20km
VDO-4010FDST-4	VDO-4010FDSR-4	Single-Mode	1310/1550nm	18dB	40km
VDO-4010FDST-6	VDO-4010FDSR-6	Single-Mode	1310/1550nm	25dB	60km
VDO-4010FDST-8	VDO-4010FDSR-8	Single-Mode	1490/1550nm	28dB	80km

 Note:

• The Optical Power Budget data fit Multi-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables. power adapter included (for standalone) US, European, UK or Australian power plug.• Please feel free to consult factory for any special requirement and customization. 

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau: