Cáp Quang Treo, Luồn Ống Single-Mode Hoặc Multi-Mode DYSFO (GYTA)

Giới thiệu

The fibres, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water resistant filling compound. A steel wire sometimes sheathed with polyethylene (PE) for cable with high fibre count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water-ingress. Then, the cable is completed with a PE sheath

 

Đặc điểm

1. Accurate fibre excess length ensures good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant and special tube filling compound ensure a critical protection of fibre
3. Specially designed compact structure is good at preventing loose tubes from shrinking
4. The following measures are taken to ensure the cable watertight: Steel wire used as the central strength member Loose tube filling compound 100% cable core filling APL moisture barrier

 

 

 

 

 

 

 

 

Ứng dụng

1. Cách thức lắp đặt: ống dẫn/trên không 
2. Thích hợp cho đường ống dài – xa và giao tiếp mạng LAN 
3. Kiểu sợi quang: Single-mode/Multi-mode 

Thông số kỹ thuật

Nhiệt độ lưu trữ: -40C to + 70C

Nhiệt độ hoạt động: -40C to + 70C

Bán kính uốn:    Tĩnh 10 x D

                                Động 20 x D

 

Stranded loose tube cable with aluminum tape (GYTA)

 

 

 

 

Note:

1. Suffix Xn denotes fibre type and see detaiis in YOFC’s cable coding illustration.

2. The colour arrangement of fibre and tube is specified in the colour identification table.

 

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau: