Trang chủ»PRODUCTS»Media Converter»Converter FO - RS232/485/422»RS-232/422/485 to optical fiber media converters – Model: UT-2278

RS-232/422/485 to optical fiber media converters – Model: UT-2278

Bộ chuyển đổi RS-232/485/422 sang quang UTEK (UT-2278) C-LINK Phân Phối

Being a multi-function fiber modem in support of asynchronism RS-232, RS-485 and RS-422 communication interface, UT-2278 is the best choice for the connection from remote terminal unit (RTU) to host(HOST) or Supervisory Control and Data Acquisition(SCADA). It supports multiple asynchronism communication protocols including RS-232, RS-485 and RS-422, and it also supports a combination of two of the RS-232, RS-485 or RS-422 interfaces as well as both of the working modes, i.e. Two-line(half-duplex) RS-485 and four-line(full duplex) RS-422. The ability to support RS-485 mode for data TXD or SD sending control greatly improves its compatibility with various kinds of software besides a sharp simplification of control method. Various kinds of fiber connection between asynchronism serial interfaces are supported by UT-2278 fiber modem. Both half duplex and full duplex communications through fiber between two asynchronism interface devices are supported with a communication distance as far as 4 kilometers for multi-mode and 20 kilometers for single-mode. The transmission rate for RS-232 can reach a maximum of 115.2KBPS, while for RS-485/RS-422 a maximum of 460KBPS can be achieved. Interfaces of different electric standards can be mixed for use with nice EMI/RFT performance, e.g. RS-232 devices can be connected to RS-485/RS-422 devices, and the interface converter or photoelectric isolator can be replaced from RS-232 to RS-485. Two data signal transmissions are supported by UT-2278: data sending and data receiving. At the same time, automatic control circuit is also provided for RS-485/RS-422 data transmission. Zero delay for converting time is achieved. ST interfaces are used for fiber connection.

1.   Supports RS-232/RS-485/RS-422 interfaces. 
2.   A synchronic transmission: point-to-point with a rate as high as 460KBPS. 
3.   Transmission distance: 4,000 meters for multi-mode and 20,000 meters for single-mode. 
4.   Working temperature: -40⁰C – 80⁰C, relative humidity from 5% to 95%. 
5.   Working wave length: 1310nm(multi-mode) and 1310nm(single mode) Electric interfaces: 
6.   RS-232: pole-shaped connector. 
7.   RS-485/422: pole-shaped connector. 
8.   Fiber interface: ST interface (other interface can be ordered SC/FC) 
9.   RS-232 interface features: 
10.  Standard RS-232 three line interface ±15KV(anti-static), ESD protection, maximum rate of 115.2KBPS. 
11.  Input voltage AC100-240V/1W 
12.  RS-485/422 interface features: 
13.  Self-adaptive interface technology enables the self adaptation of rate regulation from interface, no switch needed, and the ±15KV (anti-static) ESD protect supports as much as 32 points of polling. And 600W surge protection each line for RS-422 and RS-485 interfaces

Download datasheet:UT-2278

Hướng dẫn sử dụng : UT-2278

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email:

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau:

Họ và tên (*)

Email (*)

Số điện thoại (*)

Chủng loại

Nội dung yêu cầu

*Nhập mã bảo mật