Trang chủ»PRODUCTS»SDH/MSPP MULTIPLEXER»SDH Aggregation Multiplexer»SDH and PCM multiplexer H9MO-LMXE+

SDH and PCM multiplexer H9MO-LMXE+

.Bộ Ghép Kênh Quang SDH/MSPP Và PCM STM-1/STM-4/STM-16 Huahuan (H9MO-LMXE+)

 SDH/MSPP Và PCM STM-1/STM-4/STM-16 Huahuan (H9MO-LMXE+) C-LINK 

.Overview

H9MO-LMXE is a carrier-class, cost-effective, compact (only 3U high), STM-1/STM-4/STM-16 SDH/MSTP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.

H9MO-LMXE is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 3U high 19” wide chassis of the H9MO-LMXE has 19 slots, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for network interface unit(NIU) cards, and 14 slots for local interface unit(LIU) cards.

 Feature

1.   Support up to STM-1/STM-4/STM-16  

2.   SDH/PDH/PCM all integrated  

3.   Large cross-connect matrix capacity is 96*96 high order VC-4 cross connection or 2016*2016 VC-12 or 96*96 VC-3 level full cross connection   

4.   Support 1+1 MSP, SNCP protection 

5.   Management channel can be DCC/E1/VC12  

6.   Clocking mode supports:  internal clock / external clock / line clock / clock holdover  

7.   Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN and 801.1Q VLAN  

8.   E1 BER tester is embedded  

9.   Support up to 110 Ethernet over 8*E1 (EoPDH or EoE) remote CPEs  

10. Support up to 756 Ethernet over 1*E1 (EoPDH or EoE) remote CPEs 

11. Support up to 110 Ethernet over VC-12 (EoSDH or EoS) remote CPEs  

12. Online upgrading 

13. Full redundancy design

 

Technical Specification 

Index

Performance Parameter

SDH Interface

Max

OX01

32 STM-1 optical interfaces

OX04

4 STM-4 optical interfaces, SFP

OX16

4 aggregation STM-16 interface, SFP

Connector

SC/PC or FC/PC

Spec.

S-1.1, L-1.1, L-1.2, S4.1, L4.1

Single fiber bi-directional interface can be optionally supported

Service Card

PWR01

Power Card -48VDC (Dual power for backup)

NM01

EMS Management Card

OX01

Dual STM-1 aggregation optical card

OS01

Dual STM-1 tributary optical card

EP01

24×E1 (75W or 120W)

EP03

12×E1 (75W or 120W)

EP02

1×E3/DS3 Card

EP04

3×E3/DS3 Card

FE01

4 FE over 4 VCG trunks (EoS)

FE02

4 Fx over 4 VCG trunks (EoS)

FE04

4 FE over 1~16E1 (EoE)

FE05

4 Fx over 1~16E1 (EoE)

ED01

2×V.35 Card(framed or unframed)

DX02

Full 64E1 DS0 cross connection (2048×2048,64K)

GX01

GE optical and electrical aggregation card, 24:1

FE06

Ethernet aggregation and layer 2 switch card, 8:1

LA01

Order wire card

OS01

Dual STM-1 tributary optical card

PDH interface

E1 Spec.

Comply with G.703, 2.048Mbps, HDB3

Max E1

168E1 (14 EP03 cards support)

Ethernet

Interface

10/100Base-Tx or 100Base-Tx, Comply with IEEE 802.3

Max FE Interface

56 FE ports (14 FE01 or FE02 cards support)

Encapsulation

Comply with ITU-T G.7041 (VCAT, GFP, LCAS)

V.35

Max Interface

28 V.35 interfaces (framed or unframed) DCE/DTE

 Cross-connect Capacity

Uplink STM-1

High order 20×20 VC4sLow order 1260×1260 VC12s

Uplink STM-4

High order 32×32 VC4sLow order 2016×2016 VC12s

Management

Interface

10/100 Base-T (can be cascaded)

EOW interface

Standard socket RJ11

Physical Dimension(H/D/W)

3U: 136 × 240 ×440 (mm)

Power

Supply

-48V DC or dual power supply

Consumption

≤100W

Environment

Temperature

0°C~50°C

Humidity

≤90 %(non-condensing)

Weight

≤8 k

Download Datasheet H9MO-LMXE+

Hướng dẫn sử dụng : H9MO-LMXE+

Cách đặt hàng tại C-Link:

1. Hotline: 0904.999.815

2. Email: info@c-link.vn

3. Trực tiếp: Số 207, ngõ 192 Lê Trọng Tấn, Định Công, Hoàng Mai, Hà Nội

4. Đăng ký online theo form sau:


Họ và tên (*)

Email (*)

Số điện thoại (*)

Chủng loại

Nội dung yêu cầu

*Nhập mã bảo mật
captcha